MWD-10  Microcomputer Controlled Universal Testing Machine for Artificial Board


I.Main purpose:

The MWD-10 universal testing machine for wood-based panels is developed for conducting various physical and chemical performance tests on wood-based panels and decorative panels. It can meet the requirements of GB17657-2013 "Test Methods for Physical and Chemical Properties of Wood-based Panels and Decorative Panels", and can conduct tests on internal bonding strength, surface bonding strength, surface bonding strength, tensile strength, bending resistance, static bending strength and elastic modulus, screw grip force test, and shear test of wood-based panels, It is an ideal testing equipment for quality inspection departments and production enterprises at all levels of wood-based panels, providing you with accurate test results.

II.Technical parameter

1. Maximum test force: 10kN

2. Measurement range: 2% to 100% of the maximum test force (0.2-10kN)

3. Test force accuracy: better than ± 1% of the indicated value

4. Test force classification: four levels

5. Beam displacement measurement accuracy: resolution higher than 0.01mm

6. Deformation measurement accuracy: ± 1% (within the range of 0.2-10mm)

7. Test speed range: 0.01-500mm/min, stepless speed regulation 

8. Speed control accuracy: ± 1% (0.01-50mm/min)

9. Control range of constant force, deformation, and displacement: 0.2% -100% FS

10. Control accuracy of constant force, constant deformation, and constant displacement:

When the set value is less than 10% FS, within ± 1.0% of the set value

When the set value is ≥ 10% FS, within ± 0.1% of the set value

11. Deformation rate control accuracy: within ± 2.0% of the set value when the rate is less than 0.05% FS

Within ± 0.5% of the set value when the speed is ≥ 10.05% FS

12. Test space (customizable): A. Stretch space 600mm B. Compression space 600mm C. Width space 400mm

13. Overall power supply: single-phase, 220V ± 10%, 50Hz, 0.75kW

14. Working environment: room temperature -35 ℃, relative humidity not exceeding 80%

15. Host size: 760 × 500 × 1700mm

16. Overall weight: 350 kg

III.  The control system interface is as follows:

●Test operation interface:


Test data analysis interface:


IV. Main functions and features:

1. Host:

1.1 The machine adopts a gantry dual space structure; Pull up and press down.

1.2 The speed control system adopts an AC servo motor, with stable and reliable performance, and has overcurrent, overvoltage

Overload and other protective devices.

1.3 The transmission part adopts arc synchronous toothed belt and precision screw pair transmission, which is stable, low noise, and high transmission efficiency.

2. Control system, operating software, and data processing system

2.1 Computer control system has the advantages of high integration, stable performance, and easy adjustment. Experimental data can be collected in real-time, and experimental characteristic curves can be dynamically displayed in real-time. Experimental data files can be saved in the form of commonly used databases in Access, facilitating customer resource sharing and network management, as well as user reanalysis. For various user-defined Word 2000 reports, this software can easily access them, solving the problem of different users or the same user having different needs for experimental reports at different times. This software can process raw data of experimental force, displacement, time, deformation, and the resulting curves.

High frequency acquisition card


2.2 Protection function: This machine has two limit protection methods: software and mechanical, and the proportion of automatic shutdown exceeding the maximum load can be dynamically set; 

Up Down Shortcut Button


2.3 For load and deformation channels, automatic labeling can be achieved, which is intuitive and convenient. It can also achieve segmented calibration, which fully solves the problem of poor linearity of each sensor.



Batch experiments can achieve hierarchical display of curves and automatic curve following.

2.5 This software can achieve user-defined speed settings and computer adjustment of speed. It can also achieve high-precision speed calibration and adjust the speed gear and encoding at any time.

2.6 Monitoring the test process: Real time display of various parameters such as test force, deformation, displacement, curves, etc. during the test process can be achieved.

2.7 Software permission grading management function: In order to improve the security of software and data, the software can achieve permission grading management function by setting different password protection.

2.8 Result reproduction function: After the experimental operation is completed and saved, it can be opened and reanalyzed at any time in the future according to the user's needs.

2.9 According to user needs, load deformation, load time, load displacement, displacement time, deformation time and other curves can be selected for testing, data display, storage, analysis, and printing.

5.Basic System Configuration

1. 1 set of testing machine host

   1.1 AC servo motor 1 set

   1.2 Load sensor 1 piece

   1.3 Two sets of precision ball screw pairs

   1.4 Reduction system 1 set

2.  1 set of Sita fully digital control system

3. 1 photoelectric encoder

4. 1set of random tools (providing special tools and lists required for installation, maintenance, and operation)

5. 1 set of surface bonding test attachments

6. 1 set of attachment for internal bonding strength test

7. 1 set of surface bonding strength and bonding strength test attachments

8. 1 set of screw grip force test attachment

9. Attachment for static bending strength test

Support roller Φ 10, Φ 15 pairs each

Loading roller Φ 10, Φ 30 each

10. 1 set of tensile strength attachments

11. Technical Information:

Including: user manual, software user manual, certificate of conformity, packing list

6. Quality Assurance and Services

6.1 Technical Services

6.1.1 Can assist users in searching or translating corresponding experimental standards;

6.1.2 can assist users in calculating material strength and selecting appropriate product specifications;

6.1.3 Can conduct material testing for users in advance and assist in selecting suitable fixtures;

6.1.4 At any time, you can communicate with our company's technical personnel to help answer and solve users' difficulties and selection issues;

6.2 After sales service

6.2.1. After-sales service is our last line of defense to win customers' respect. There is no reason let the service not timely.  

6.2.2. We can provide training installment and debugging services. 

6.2.3. Our products are guaranteed for one year.

6.2.4. 24-hour online service is also available.